Professional type-MT-5000
A new objective lens with high resolution and high contrast is used.
Slender and long mechanism design, does not occupy space, is conducive to placement.
The ceramic base is not easy to be contaminated with dust, easy to clean, and not easy to scratch.
The focusing axis is designed near the base, which allows hands to easily observe for a long time without accidentally touching the sample stage.
Single-sided sample fixing clip, easy to operate with one hand, changing samples.
With the same focal axis design, there is no need to adjust the focal length after changing the magnification under the focusing condition.
The voltage input is automatically adjusted, so it can be applied to 100V ~ 240V sockets.
The entire microscope is imported from Japan.
Optical system : Infinity-corrected optical system (F = 200mm)
Binocular tube : 30 ° tilt with half-fold type, interpupillary distance adjustable from 53mm to 75mm
Camera tube : Camera tube (in accordance with JIS standard), C-mount
Eyepiece : SWH10X (field of view 22 mm)
Nose wheel : Five-hole left-wheel ball bearing type
Objective lens : U plane, achromatic
. 4X (NA0.10)
. 10X (NA0.25)
. S40X (NA0.65)
. S100X oil (NA1.25)
Stage : rack and pinion mechanical platform
Dimensions : 191mm x 128mm
Moveable range: 52mm x 78mm
Lower right coaxial handle
Ceramic coating
Abbe condenser (NA1.25)
Focusing device : Coarse / fine moving coaxial handle, rack and pinion type
(Total stroke amount 23 mm, micro handle 1 rotates 0.2 mm)
Lighting : Koehler halogen lamp (6V 30W) with blue filter