Products

Metallographic microscope

Brightfield-MT-7000 / 8000
Brightfield-MT-7000 / 8000

Epi objectives with high-resolution, high-contrast images.
Slender and long mechanism design, does not occupy space, is conducive to placement.
The outer ceramic material carrier is not easy to be contaminated with dust, easy to clean, and not easy to scratch.
Groove design, easy to replace and correct.
The focusing axis is designed near the base, which allows hands to easily observe for a long time without accidentally touching the sample stage.
With the same focal axis design, there is no need to adjust the focal length after changing the magnification under the focusing condition.
The voltage input is automatically adjusted, so it can be applied to 100V ~ 240V sockets.
The entire microscope is imported from Japan.

Brightfield and darkfield-MT-7500 / 8500
Brightfield and darkfield-MT-7500 / 8500

Epi BD objectives with high-resolution, high-contrast images.
Slender and long mechanism design, does not occupy space, is conducive to placement.
The outer ceramic material carrier is not easy to be contaminated with dust, easy to clean, and not easy to scratch.
Groove design, easy to replace and correct.
The focusing axis is designed near the base, which allows hands to easily observe for a long time without accidentally touching the sample stage.
With the same focal axis design, there is no need to adjust the focal length after changing the magnification under the focusing condition.
The voltage input is automatically adjusted, so it can be applied to 100V ~ 240V sockets.
The entire microscope is imported from Japan.

倒立型  IT-7000
倒立型 IT-7000

• IT-7000倒立金相顯微鏡
•採用高解析度、高對比影像的 Epi 物鏡
•廣泛應用於IC/IC載板/LED/電子零組件細微觀察.
•可更換式觀察鏡筒.
•鋁鎂合金材質,堅固穩定,表面塗佈耐藥性保護漆,且不易刮傷.
•更換式設計,利於往後顯微鏡升級或更換配件.
•調焦軸設計在底座附近,可以讓手在長時間下輕鬆觀察並且不會誤碰到樣品台.
•同焦軸設計,在對焦狀況下,更換倍率後毋須調整焦距.
•電壓輸入自動調整,因此可適用於100V-240V的插座.
•整台顯微鏡為日本製造原裝進口.